THEATRE & STUDIO
ECLIPSEHD2 updates ECLIPSEHD ranges with extra brightness and higher CRI/R9/TLCI.
The fixture is a proper LED replacement for the traditional 750W Tungsten ellipsoidal luminaire. The optical system harnesses the power of a 230W COB LED to create an even beam with clean shutter cuts and beautiful sharp or soft edge gobo focusing.
Featuring HD dimming and available in a 3300K or 5400K, the ECLIPSEHD2 delivers the performance and quality of output demanded from this level of the luminaire.
Features:
Outstanding brightness over 15K lm for DY and 14k lm for TU versions
CRI>95 (DY) and CRI>97 (TU), High R9 and TLCI values
-
Source:1x230W high-power white LED
-
CT: (TU) 3300 K - (DY) 5400K
-
CRI: (TU) 97 - (DY) 95,5
-
Luminous flux: (TU) 19°: 10989 lm; 26°: 13504 lm; 36°:13548 lm; 50°: 12020 lm - (DY) 19°: 11694 lm; 26°: 14466 lm; 36°:14454 lm; 50°: 12267lm
-
Lux:(TU) 19° 28800 lux; 26° 22300 lux; 36° 12600 lux; 50° 4150lux @3m
-
Lux: (DY) 19° 33000 lux; 26° 24300 lux; 36° 13900 lux; 50° 6000lux @3m
-
Source life expectancy: >50.000
-
Other: TLCI: (TU) 19°: 90.5, 26°: 89.7, 36°: 92, 50°: 90
-
Beam angle: optional 19° / 26° / 36° / 50° / Z 15-30° / Z 25-50°
-
Lens type: high-quality glass lens optics
-
Focus: manual
-
Colour mixing: static white
-
Gobo size:B
-
Static colour mode: selection of static colour
-
Manual colour mode:
-
Auto mode:built-in programs with execution speed adjustment
-
Body: sturdy die-cast aluminium body conceived for long-time durability
-
Body colour: black
-
Protocols: DMX512, RDM
-
DMX channels: 1 / 2 / 5 channel
-
RDM: RDM ready for fixture remote monitor and setting
-
Display: black OLED high resolution display
-
Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
-
Master/Slave: for synchronized operation of more units linked in a chain
-
Dimmer: linear 0~100% electronic dimmer
-
Dimmer curves: 4 different dimming curves available
-
Strobe / shutter: 1-25 Hz, electronic
-
Operating temperature: -10° ~ +45°
-
Flicker: flicker free operation
-
Selectable PWM: 600~25K Hz
-
Power supply: 100-240V – 50/60Hz
-
Power consumption (at 230V): 229 W
-
Power consumption (at 120V): 226 W
-
Output (at 230V): 15 units on a single power line
-
Output (at 120V): 8 units on a single power line
-
Cooling: combination of heat pipe cooling system and low noise fan
-
Sospension and fixing: hanging bracket suitable for safe hanging and positioning
-
Signal connection: Amphenol XLR 5p IN/OUT connectors
-
Power connection: Neutrik powerCON IN/OUT connectors
-
IP rating: 20
-
Dimensions (WxHxD): 528*342*526mm
-
Weight: 7,11 kg
Eclipse HD2
230 W high power LED ellipsoidal profile with white source
EclProfile FS 
High power RGBL full spectrum ellipsoidal LED
EclProfile FS is a full colour elipsoidal LED, designed to deliver a full range of pastels, saturates and whites, both with or without gobos. The EclProfile FS' RGB + Lime LED engine has been specially engineered to provide a full spectrum and full output in the most discerning environments, regardless of which role the EclProfile FS is playing.
Main features:
- RGB + Lime ellipsoidal LED with HD dimming and extensive colour palette
- High definition optics for sharp focus and gobo projection
- Accepts industry standard accessories
PHOTO GALLERY
TECHNICAL SPECIFICATIONS
- Source: 91x3W RGB + lime LEDs
- CCT: @full 5.000K
- Luminous flux: (5°) TBD; (10°) TBD; (14°) 4'619 lm; (19°) 5'133 lm; (26°) 6'100 lm; (36°) 5'970 lm; (50°) 5'596 lm; (70°) TBDlm @full
- Lux: (5°) TBD; (10°) TBD; (14°) 4'321 lx; (19°) 2'567 lx; (26°) 1'711 lx; (36°) 873 lx; (50°) 462 lx; (70°) TBDlx @5 m full
- CRI: 86 @3.200 K; 85 @5.600 K
- TLCI: 82 @5.600 K
- TM30 Rf: 84 @3.200 K
- TM30 Rg: 109 @3.200 K
- Source life expectancy: > 50.000 h
- Lens type: high-quality glass lens optics
- Additional optics: optional 5° / 10° / 14° / 19° / 26° / 36° / 50° / 70° / zoom 15°-30° / zoom 25°-50
- Focus: manual
- Colour mixing: RGB + lime / full colour
- CCT: CCT control through dedicated DMX channel
- White presets: 2.700 K ~ 10.000K
- Colour wheel: virtual colour wheel with macros
- Macros: several pre-built pixel macros with adjustable speed
- Gobo size: B, outer: 86 mm - image: 64,5 mm - thickness: 1,1 mm
- Static mode: selection of static colour
- Manual mode: manual adjustment of colour
- Auto mode: built-in programs with execution speed adjustment
- Special features: different presets for fan mode and output management
- Body: sturdy die-cast aluminium body
- Body colour: black
- Protocols: DMX512, RDM
- DMX channels: 1 / 2 / 3RGB / 4RGBL / 5RGBL / 3 / 4 / 5 / 8 / 13 ch - Tungsten / 3.200 K / 5.400 K / 6.500 Kchannel
- RDM: RDM for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB - DMX interface (UPBOX2) not included
- Master/Slave: for synchronised operation of more units linked in a chain
- Dimmer: linear 0 ~ 100% electronic dimmer
- Strobe / shutter: 1 - 25 Hz, electronic
- Display battery: self-charging battery backup
- Operating temperature: -20° ~ +45°
- LED Control: flicker free operation
- Selectable PWM: 600 ~ 25.000 Hz
- Mains power supply: 100-240V - 50/60Hz
- Max power consumption: 200W
- Output (at 230V): 10 units on a single power line
- Power factor: > 0,95
- IP rating: 20
- Cooling: low noise fan
- Suspension and fixing: bracket for hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
- Dimensions (WxHxD): 265x259x540mm / 10.43''x10.2''x21.26''
- Weight: 7,3kg / 16.09lbs
- 1 x ECLFS
- 1 x 1,5 meters power cable (SCHUKO plug - NEUTRIK POWERCON TRUE1 IP65)
- User Manual
EclProfile FS
High power RGBL full spectrum ellipsoidal LED
| Code | |
 |
ECLFR2KDY |
 |
ECLFR2KTU |
ECLFR2K is the LED replacement for a standard tungsten 2K fresnel. Featuring the output characteristics of a traditional Fresnel but with beam control, functional barn doors and a power source that focuses on outstanding colour rendition. The ECLFR2K adds all the advantages of LED to the Fresnel.
TU (3200K) and DY (5600K) versions available both with HD dimming
Fresnel lens with 15° to 45° zoom range
Silent operation for studio and stage use
-
Source: 507W high-power white LED
-
CT: (TU) 3200 K - (DY) 5600K
-
CRI: (TU) 97 Ra - (DY) 92
-
R9: (TU) >90 - (DY) > 81
-
Luminous flux: (TU) (45°) 25338 lm (15°) 22556 lm - (DY) (45°) 33750 lm (15°) 27960lm @Full
-
Lux: (TU) (15°) 28400 lux - (45°) 6150 lux - (DY) (15°) 31200 lux - (45°) 6790lux @3m full
-
Lux: (TU) - (15°) 10224 lux - (45°) 2214 lux - (DY) (15°) 11231 lux - (45°) 2445lux @5m full
-
Source life expectancy: >50.000 h
-
Other: TM30-15RG/RF: (TU - 15°) 94/103, (TU - 45°) 93/104 - (DY - 15°) 90/102, (DY - 45°) 90/103 - TLCI: (TU - 15°) 94.8, (TU - 45°) 94.4 - (DY - 15°) 94, (DY - 45°) 93.6
-
Zoom: 15° - 45° manual
-
Lens diameter: 250mm
-
Lens type: Fresnel zoom lens
-
Other: Spigot, barn door and gel frame included
-
Colour mixing: warm white
-
Macros: several pre-build macros with adjustable speed
-
Static colour mode: selection of static dimmer
-
Manual colour mode: manual adjust of dimmer throught menu and knob
-
Auto mode: built-in programs with execution speed adjustment
-
Hardware on-board:filter frame, 8 doors barndoor, omega bracket spigot
-
Body: sturdy die-cast aluminium body conceived for long-time durability
-
Body colour:black
-
Other: Pan/Tilt infinite for pole operated version
-
Protocols: DMX512, RDM, Local knob
-
DMX channels: 1 / 2-1 / 2-2 / 3 / 5channel
-
RDM: RDM ready for fixture remote monitor and settings
-
Display: black OLED high resolution display
-
Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
-
Master/Slave: for synchronized operation of more units linked in a chain
-
Other: 16bit control of dimmer
-
Dimmer: linear 0~100% electronic dimmer
-
Dimmer curves: different dimming curves available
-
Strobe / shutter: 1 - 30 Hz, electronic
-
Operating temperature: -10° ~ +45°
-
Flicker: flicker free frequency with adjustable PWM
-
Selectable PWM: 600~25K Hz
-
Power consumption: 550W
-
Power supply: 100-240V – 50/60Hz
-
Power consumption (at 230V): 466W
-
Power consumption (at 120V): 469W
-
Output (at 230V): 4 units on a single power line
-
Output (at 120V): 2 units on a single power line
-
Power factor: pF 0.96 @ 230V - pF 0.99 @ 120V
-
Cooling: combination of heat pipe cooling system and low noise fan
-
Sospension and fixing: hanging bracket suitable for safe hanging and positioning
-
Signal connection: Amphenol XLR 5p IN/OUT connectors
-
Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
-
IP rating: 20
-
Dimensions (WxHxD): 421x537x455mm
-
Weight: 17.2kg
EclipseFresnel 2K
FC and Tunable White with colour correction LED Fresnel, to replace 2.000 W lamp
EclFresnel PTW
LED Fresnel pole operated FC and Tunable White with colour correction, to replace 1.000W lamp
EclFresnel PTW is an advanced LED replacement of traditional 1.000W Fresnel lamps. Offering 6 colour mixing, delivering high precision reproduction of the white spectrum from 2.800 K to 10.000 K with high CRI and an extensive colour reproduction. The optical system harnesses the power of a 260 W custom LED with 6 colours to create an even projection, beautiful colours and precise white, with the option to apply +/- green and magenta correction to match other sources of light. Featuring HD dimming and tuning from 2.800 K to 10.000 K version, the EclFresnel PTW delivers the performance and quality of output demanded from this level of luminaire.
Main features:
- Tunable white 2.800 K - 10.000 K with high CRI and extensive colour mixing
- +/- green and magenta white tuning
- Silent operation for studio and stage use
PHOTO GALLERY
TECHNICAL SPECIFICATIONS
- Source: 260W 6 colour custom LEDs source (red, orange, green, royal blue, blue, lime)
- CCT: 2.800 K - 10.000K
- Luminous flux: (17°) 4'653 lm - (57°) 7'896lm @full
- Lux: (17°) 1'678 lx - (57°) 344lx @5 m full
- CRI: 90 @3.200 K; 89 @5.600 K
- R9: 80 @3.200 K; 87 @5.600 K
- TLCI: 77 @5.600 K
- TM30 Rf: 87 @3.200 K; 81 @5.600 K
- TM30 Rg: 106 @3.200 K; 106 @5.600 K
- Source life expectancy: > 50.000 h
- Zoom: 17° - 57° half peak angle
- Lens diameter: 8'' - 200mm / 0.31''
- Lens type: Fresnel zoom lens
- Focus: manual
- Colour mixing:
- CCT: CCT control, + / - green correction, tungsten emulation
- White presets: 2.800 K -10.000K
- Colour wheel: virtual colour wheel with macros
- Macros: several pre-built macros with adjustable speed
- Static mode: selection of static colour
- Manual mode: manual adjustment of intensity, CT, colour correction from knob
- Auto mode: built-in programs with execution speed adjustment
- Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
- Hardware on-board: filter frame, 8 doors barndoor, spigot
- Pan angle: 360° with manual regulation
- Tilt angle: 340° with manual regulation
- Body: sturdy die-cast aluminium body
- Body colour: black, white finishing available
- Other: spigot 28 mm
- Protocols: DMX512, RDM, rotatory knob
- DMX channels: 1 / 2 / 5 - 1 / 5 - 2 / 7 / 9 / 12 / 13 / 16 / 19 / 21channel
- RDM: RDM for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
- Other: 16bit control of dimmer and colour
- Dimmer: linear 0 ~ 100% electronic dimmer
- Dimmer curves: 4 selectable dimming modes available
- Strobe / shutter: 1 - 30 Hz, electronic
- Operating temperature: -10° ~ +45°
- LED Control: flicker free frequency with adjustable PWM
- Selectable PWM: 600 ~ 25.000 Hz
- Mains power supply: 100-240V - 50/60Hz
- Max power consumption: 260W
- Output (at 230V): 11 units on a single power line
- Power factor: >0,93
- IP rating: 20
- Cooling: combination of heat pipe cooling system and low noise fan
- Suspension and fixing: bracket for hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
- Dimensions (WxHxD): 341x545x343mm / 13.43''x21.46''x13.5''
- Weight: 9,7kg / 21.38lbs
- 1 x ECLFRESNELPTW
- 1 x 1,5 meters power cable (SCHUKO plug - NEUTRIK POWERCON TRUE1 IP65)
- 1 x ECLFRSBD
- 1 x ECLFRSTPG
- User Manual
EclFresnel PTW
LED Fresnel pole operated FC and Tunable White with colour correction, to replace 1.000W lamp
EclCyclorama 100
330 W linear soft CYC and flood light with RGB + Warm White colour mixing
EclCyclorama 100 is a soft-edge, linear cyclorama and floodlight, designed in a surprisingly low profile form factor to meet applications at both front and end of the stage, offering an unprecedent level of brightness in its category.
The fixture is equipped with a custom and calibrated RGB + Warm White LED source, which is capable to deliver a linear and high quality white reproduction of the entire spectrum with high CRI, TLCI and TM30 performances.
The optical system has been designed to offer a very wide asymetric beam angle, and capable of a superior lumen efficiency, making the EclCyclorama range a very flexible solution, suitable for both application where fixture are connected each other or separated by a considerable distance, without worrying of dark-edge or uniformity gaps.
The fixture is extremely user firendly and offers a moltitude of control possibilities being DMX, RDM, Artnet, sACN and Wireless DMX.
Main features:
- RGB + Warm White colour systems allows high quality of whites (CRI 93 @3200 K) and bright colours.
- Slim design, with only 12 cm height for easy implementation in the front or at the back of the stage.
- Wide Asymmetric beam angle to allow flexible installation at modular distances between fixtures
- Hardware designed with tilt angle adjustment, beam control and flexible hanging and ground stacking applications.
TECHNICAL SPECIFICATIONS
- Source: 330W RGB + Warm White
- Luminous flux: (with 80°x40° filter on board) 27'342lm @full
- Lux: @1m to wall and 1,5m height @ full (with standard filter 80°x40°) 1'240 lx - (with 40° filter) 2'610 lx - (with 10°x60° filter) 3'110 lx - (with 30°x60° filter) 2'880lx
- CRI: 93 @ 3200K; 92,6@ 5600K
- R9: 88 @ 3200K; 93,7@ 5600K
- TLCI: 91 @ 5600K
- TM30 Rf: 89,8 @ 5600K
- TM30 Rg: 106 @ 5600K
- Source life expectancy: > 50.000 h
- Beam angle: (HxV) 80°x40°
- Additional optics: see available accessories
- Colour mixing: RGB + Warm White
- CTC: CTC control, + / - green correction, Tungsten emulation
- White presets: 2.800 K - 6.500K
- Colour wheel: virtual colour wheel with macros
- Control Resolution: 16bit Dimmer, Colours
- Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
- Hardware on-board: sockets for Quick-Lock Omega bracket (clamp not included)
- Body: sturdy die-cast aluminium body
- Body colour: black
- Other: +/- 8° angle adjusting
- Protocols: DMX512, RDM, Art-Net, sACN, W-DMX
- W-DMX: included, wireless solution receiver
- RDM: RDM ready for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
- Dimmer curves: Selectable dimming modes available
- Strobe / shutter: 1 - 30 Hz, electronic
- Display battery: self-charging battery backup
- Operating temperature: -10° ~ +45°
- LED Control: flicker free frequency with adjustable PWM
- Selectable PWM: 600 ~ 25.000 Hz
- Mains power supply: 100-240 V – 50/60 Hz
- Max power consumption: 400W
- Power factor: >0,94
- Cooling: heat sink without fan
- Sospension and fixing: any position with quick-lock omega brackets
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Data connection: RJ45 IN/OUT
- Power connection: Seetronic powerCON waterproof IN/OUT connectors
- IP rating: IP20
- Dimensions (WxHxD): 1000x119x148mm / 39.37''x4.69''x5.83''
- Weight: 9,6kg / 21.16lbs
EclCyclorama 100
EclCyclorama 050
ORDER CODE: ECLCYC050170W linear soft CYC and flood light with RGB+Warm White colour mixing
EclCyclorama 050 is a soft-edge, linear cyclorama and floodlight, designed in a surprisingly low profile form factor to meet applications at both front and end of the stage, offering an unprecedent level of brightness in its category. The fixture is equipped with a custom and calibrated RGB + Warm White LED source, which is capable to deliver a linear and high quality white reproduction of the entire spectrum with high CRI, TLCI and TM30 performances. The Optical system has been designed to offer a very wide asymetric beam angle, and capable of a superior lumen efficiency, making the EclCyclorama range a very flexible solution, suitable for both application where fixture are connected each other or separated by a considerable distance, without worrying of dark-edge or uniformity gaps. The fixture is extremely user friendly and offers a multitude of control possibilities being DMX, RDM, Artnet, sACN and Wireless DMX.
Main features:
- RGB + Warm White colour systems allows high quality of whites (CRI 93 @3.200 K) and bright colours.
- Slim design, with only 12 cm height for easy implementation in the front or at the back of the stage.
- Wide Asymmetric beam angle to allow flexible installation at modular distances between fixtures
- Hardware designed with tilt angle adjustment, beam control and flexible hanging and ground stacking applications.
PHOTO GALLERY
TECHNICAL SPECIFICATIONS
- Source: 170W RGB + Warm White
- Luminous flux: (with 40°x80° filter on board) 13'896lm @full
- Lux: @1 m to wall and 1,5 m height @ full (with standard filter) 625 lx - (with 40° filter) 1'530 lx - (with 10°x60° filter) 1'590 lx - (with 30°x60° filter) 1'690lx
- CRI: 93 @3.200 K; 91 @5.600 K
- R9: 91 @3.200 K; 95 @5.600 K
- TLCI: 87 @5.600 K
- TM30 Rf: 88,8 @5.600 K
- TM30 Rg: 107,4 @5.600 K
- Source life expectancy: > 50.000 h
- Beam angle: (VxH) 40° x 80°
- Additional optics: see available accessories
- Colour mixing: RGB + Warm White
- CCT: CCT control, + / - green correction, tungsten emulation
- White presets: 2.800 K - 6.500K
- Colour wheel: virtual colour wheel with macros
- Control Resolution: 16-bit dimmer, colours
- Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
- Hardware on-board: sockets for quick-Lock Omega bracket (clamp not included)
- Body: sturdy die-cast aluminium body
- Body colour: black
- Other: +/- 8° angle adjusting
- Protocols: DMX512, RDM, Art-Net, sACN, W-DMX
- W-DMX: included, wireless solution receiver
- RDM: RDM for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
- Dimmer curves: selectable dimming modes available
- Strobe / shutter: 1-30 Hz, electronic
- Display battery: self-charging battery backup
- Operating temperature: -10° ~ +45°
- LED Control: flicker free frequency with adjustable PWM
- Selectable PWM: 600 ~ 25.000 Hz
- Mains power supply: 100-240V - 50/60Hz
- Max power consumption: 180W
- Power factor: >0,94
- IP rating: IP20
- Cooling: heat sink without fan
- Suspension and fixing: any position with quick-lock omega brackets
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Data connection: RJ45 IN/OUT
- Power connection: Seetronic powerCON waterproof IN/OUT connectors
- Dimensions (WxHxD): 500x119x148mm / 19.69''x4.69''x5.83''
- Weight: 5kg / 11.02lbs
- 1 x ECLCYC050
- 1 x 1,5 meters power cable (SCHUKO plug - SEETRONIC IP65 power connector)
- 1 x OS25
- User Manual
EclCyclorama 50
170W linear soft CYC and flood light with RGB+Warm White colour mixing
EclPanel TWC
740W Tunable White and Colourful LED soft light with pixels and lighting effects
EclPanel TWC, is the compact 2x1 LED soft light that provides a beautiful, wide source of soft and precise colours. In addition to this, the PROLIGHTS EclPanel TWC comes with a full range of white reproductions, from daylight through to tungsten tones, reaching a superior light quality with high CRI, TLCI and TM-30. The EclPanel TWC allows for quick and accurate local adjustment of light through 3 rotatory knobs with three fully featured modes: CCT with +/- green shift, HSI for total control of hue, saturation and intensity, FX mode to access the on board pixel cinema effects. The unit can also be controlled on a per-section basis, allowing for reproduction of onboard customisable effects or to be self-made through the lighting desk. Both methods provide eye-candy, with the appealing and modern front looks and cinematic special effects. The unit is designed with an onboard driver and built-in power supply and, being lightweight, the EclPanel TWC offers easy rigging and cabling making it the perfect lighting tool for every location.
Main features:
- 740W RGB + Warm White LED source
- CRI > 95,5; R9 > 92; TLCI > 92
- 8 section pixel control and built-in lighting effects for Cinema applications
- Silent operation with multiple fan modes
- Battery connection (4pXLR 24-36V): compatible with industry standard external batteries (optional)
TECHNICAL SPECIFICATIONS
- Source: 740W RGB + Warm White
- Luminous flux: 34'236lm @4.000 K with MD filter
- Lux: 404lx @5 m full
- CRI: 94,6 @ 3200K; 95,5 @ 5600K
- R9: 97 @ 3200K; 92 @ 5600K
- TLCI: 92 @ 5600K
- TM30 Rf: 92 @ 3200K; 89,5 @ 5600K
- TM30 Rg: 103 @ 3200K; 102,4 @ 5600K
- Source life expectancy: > 50.000 h
- Beam angle: 102°
- Field angle: 159°
- Lens type: Medium Density diffusion panel (interchangeable)
- Additional optics: see available accessories
- Colour mixing: RGB + Warm White
- CTC: CTC control, + / - green correction, Tungsten emulation
- White presets: 2800 K - 10000K with 28 K resolution
- Colour wheel: virtual colour wheel with macros
- Control Resolution: 16bit dimmer, colours
- Pixel patterns: pre-programmed pixel macros and cinema lighting effects patterns
- Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
- Body: sturdy die-cast aluminium body
- Body colour: black
- Protocols: DMX512, RDM, W-DMX, rotatory knob
- Stand Alone: selectable mode through 3 rotatory knobs
- Pixel control: 8 section control
- W-DMX: included, wireless solution receiver
- RDM: RDM ready for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
- Dimmer curves: selectable dimming modes available
- Strobe / shutter: 1 - 30 Hz, electronic
- Display battery: self-charging battery backup
- Operating temperature: -20° ~ +45°
- LED Control: flicker free frequency with adjustable PWM
- Selectable PWM: 600 ~ 36.000 Hz
- Mains power supply: 100-240V - 50/60Hz
- Low Voltage DC mains: 24-36V
- Max power consumption: 440W
- Power factor: >0,94
- Cooling: active, silent operation
- Suspension and fixing: bracket for hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
- Low Voltage DC connector: XLR 4p
- IP rating: 20
- Dimensions (WxHxD): 819x431x144 mm / (with PO system) 836x431x144mm / 32.24''x16.97''x5.67''
- Weight: 15,3/()17,1kg / 33.73lbs
EclPanel TWC
EclPanel TWCJr
ORDER CODE: ECLPANELTWCJR370W Tunable White and colourful LED soft light with pixels and lighting effects (driven @ 220W)
EclPanel TWCJr, is the compact 1x1 LED soft light that provides a beautiful, wide source of soft and precise colours. In addition to this, the PROLIGHTS EclPanel TWCJr comes with a full range of white reproductions, from daylight through to tungsten tones, reaching a superior light quality with high CRI, TLCI and TM-30. The EclPanel TWCJr allows for quick and accurate local adjustment of light through 3 rotatory knobs with three fully featured modes: CCT with +/- green shift, HSI for total control of hue, saturation and intensity, FX mode to access the on board pixel cinema effects. The unit can also be controlled on a per-section basis, allowing for reproduction of onboard customisable effects or to be self-made through the lighting desk. Both methods provide eye-candy, with the appealing and modern front looks and cinematic special effects. The unit is designed with an onboard driver and built-in power supply and, being lightweight, the EclPanel TWCJr offers easy rigging and cabling making it the perfect lighting tool for every location.
Main features:
- 370W RGB + Warm White LED source (driven @ 220W)
- CRI > 94; R9 > 88,8; TLCI > 92
- 4 section pixel control and built-in lighting effects for cinema applications
- Silent operation with multiple fan modes
- Battery connection (4pXLR 24-36V): compatible with industry standard external batteries (optional)
PHOTO GALLERY
TECHNICAL SPECIFICATIONS
- Source: 370W RGB + Warm White LEDs (driven @ 220W)
- Luminous flux: 17'109lm @4.000 K with LD filter
- Lux: @4000K, 265lx @5 m
- CRI: 90 @3.200 K; 94 @5.600 K
- R9: 84,1 @3.200 K; 88,8 @5.600 K
- TLCI: 92 @5.600 K
- TM30 Rf: 90 @3.200 K; 89,4 @5.600 K
- TM30 Rg: 105 @3.200 K; 104 @5.600 K
- Source life expectancy: > 50.000 h
- Beam angle: 102°
- Field angle: 158°
- Lens type: medium density diffusion panel (interchangeable)
- Additional optics: see available accessories
- Colour mixing: RGB + Warm White
- CCT: CCT control, + / - green correction, tungsten emulation
- White presets: 2.800 K - 10.000K with 28 K resolution
- Colour wheel: virtual colour wheel with macros
- Control Resolution: 16-bit dimmer, colours
- Pixel patterns: pre-programmed pixel macros and cinema lighting effects patterns
- Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
- Body: sturdy die-cast aluminium body
- Body colour: black
- Protocols: DMX512, RDM, W-DMX, rotatory knob
- Stand Alone: selectable mode through 3 rotatory knobs
- Pixel control: 4 section control
- W-DMX: included, wireless solution receiver
- RDM: RDM for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
- Dimmer: linear 0 ~ 100% electronic dimmer
- Dimmer curves: selectable dimming modes available
- Strobe / shutter: 1 - 30 Hz, electronic
- Display battery: self-charging battery backup
- Operating temperature: -20° ~ +45°
- LED Control: flicker free frequency with adjustable PWM
- Selectable PWM: 600 ~ 40.000 Hz
- Mains power supply: 100-240V - 50/60Hz
- Low Voltage DC mains: 24-36V
- Max power consumption: 230W
- Power factor: >0,97
- IP rating: 20
- Cooling: active, silent operation
- Suspension and fixing: bracket for hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
- Low Voltage DC connector: XLR 4p
- Dimensions (WxHxD): 529x430x144 mm / (with PO system) 546x430x144mm / 20.83''x16.93''x5.67''
- Weight: 10,5/()11,8kg / 23.15lbs
- 1 x ECLPANELTWCJR
- 1 x 1,5 meters power cable (SCHUKO plug - NEUTRIK POWERCON TRUE1 IP65)
- 1 x ECLFRSPG
- User Manual
EclPanel TWCJr
370W Tunable White and colourful LED soft light with pixels and lighting effects (driven @ 220W)
EclProfile CT+IP
Waterproofed high quality six colours LED ellipsoidal, Tunable White and colour mixing
The EclProfile CT+IP is a tunable white and full colour IP LED ellipsoidal designed for exterior applications such as touring, theme parks, cruise ships, and any outdoor events.
It uses the same 6-colour LED source than its indoor version, but with a 30% higher lumen output, as it's equipped with a bigger power-supply and heat sink. The IP body of the fixtures takes any of the standard lenses and accessories of the EclProfile range.
Its custom LED array and the powerful on-board colour control allows reaching bright and high-quality whites, up to 97 CRI, keeping a consistent colour output and ensuring a total control of the light.
The wide feature set includes special theatrical functions such as tungsten emulation on dimming and colours, LEE colour presets, virtual CTO and studio functions, such as green and magenta tuning on white presets.
Main features:
- IP rated for exterior applications
- Rotating gobo IP65
- Linear white CCT from 2,800K to 10,000K, CRI up to 96
- Industry-standard colour gel matching, tungsten emulation on dimming, tint control (+/- green).
PHOTO GALLERY
TECHNICAL SPECIFICATIONS
- Source: 96x3W 6 colour custom LEDs source (red, green, blue, royal blue, mint, pc amber)
- CCT: @full 5.000K
- Luminous flux: (5°) 3'805 lm; (10°) 4'790 lm; (14°) 5'047 lm; (19°) 5'380 lm; (26°) 6'681 lm; (36°) 6'814 lm; (50°) 5'773 lm; (70°) 7'430lm @full
- Luminous flux: (zoom 15°-30°) (min angle) 5'290 lm; (max angle) 6'664 lm - (zoom 25°-50°) (min angle) 7'042 lm; (max angle) 9'817 @full
- Lux: (5°) 14'638 lx; (10°) 8'663 lx; (14°) 3'812 lx; (19°) 2'530 lx; (26°) 1'759 lx; (36°) 810 lx; (50°) 474 lx; (70°) 306lx @5 m full
- Lux: (zoom 15°-30°) (min angle) 3'502 lx; (max angle) 1'800 lx - (zoom 25°-50°) (min angle) 2'608 lx; (max angle) 974lx @5 m full
- CRI: 93,7 @3.200 K; 97,6 @5.600 K
- R9: 98,6 @3.200 K; 98,2 @5.600 K
- TLCI: 95 @5.600 K
- TM30 Rf: 92 @5.600 K
- TM30 Rg: 100,1 @5.600 K
- Source life expectancy: > 50.000 h
- Lens type: high-quality glass lens optics
- Additional optics: optional 5° / 10° / 14° / 19° / 26° / 36° / 50° / 70° / zoom 15°-30° / zoom 25°-50°
- Focus: manual
- Other: see available accessories
- Colour mixing: RGB, Royal Blue, Mint, PC Amber
- CCT: CCT control, + / - green correction, tungsten emulation
- White presets: 2.800 K ~ 10.000K
- Colour wheel: LEE filter emulation and RGB / HSI / CMY input mode selectable
- Rotating gobos: 1 rotating gobo controlled on DMX
- Gobo size: B, outer: 86 mm - image: 64,5 mm - thickness: 1,1 mm
- Special features: 4 fan modes available and output management and linear crossfade channel from any white to any colour; virtual CTO on colours
- Body: sturdy die-cast aluminium body
- Body colour: RAL 9004
- Protocols: DMX512, RDM
- Stand Alone: selection of static colours, white presets, manual colours and built-in effects with adjustable speed
- DMX channels: UNO / DUO / Basic / Standard / Extended / RAW Direct / RAW 16bit / XYchannel
- RDM: RDM for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB - DMX interface (UPBOX2) not included (through dedicated software)
- Master/Slave: for synchronised operation of more units linked in a chain
- Dimmer: linear 0 ~ 100% electronic dimmer
- Dimmer curves: 4 selectable dimming modes available
- Strobe / shutter: 1 - 25 Hz, electronic
- Operating temperature: -20° ~ +45°
- LED Control: flicker free operation
- Selectable PWM: 600 ~ 25.000 Hz
- Mains power supply: 100-240V - 50/60Hz
- Max power consumption: 264W
- Output (at 230V): 7 units on a single power line
- Power factor: > 0,95
- IP rating: 65 for temporary outdoor application, not for fixed installations
- Cooling: low noise fan
- Suspension and fixing: bracket for hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Seetronic powerCON TRUE IP65 IN/OUT
- Dimensions (WxHxD): 324x540x660mm / 12.76''x21.26''x25.98''
- Weight: 10kg / 22.05lbs
- Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC
- 1 x ECLCTPLUSIP
- 1 x 1,5 meters power cable (BARE END - SEETRONIC IP65 power connector)
- 1 x Calibration Report
- User Manual
EclProfile CT+IP
EclProfile FWIPVW
Waterproofed High quality Variable White LED ellipsoidal, with linear CCT 2,700 K - 5,600 K
EclProfile FW IP VW is the IP Full White version of the new generation of Ecl Profile LED ellipsoidals with Variable White source variants. The EclProfile FW IP VW has been engineered in the same housing and optical design of the colour mixing versions and for those users who require higher brightness and quality on a specific white point, offering a superior evenness and crisp focus of the new EclProfile range, or simply prefer to operate LED fixtures in a classical way. The LED source for both versions has been selected to achieve the finest quality of whites, having high scores of CRI, R9 and TM30 and being ideal for applications like corporate events, advertising, exhibitions, among others.
Main features:
- IP rated for exterior applications
- Rotating gobo IP65
- Linear white CCT from 2,700 K to 5,600 K.
- High lumen output and superior quality of whites (high CRI, TLCI, TM30).
- Silent operation and compatible with industry standard accessories.
PHOTO GALLERY
TECHNICAL SPECIFICATIONS
- Source: 91x3W high-power white LED
- CCT: from 2.700K to 6.500K
- Luminous flux: (26° only TU) 3'696 lm; (26° only DY) 4'406 lm; (26°) 7'951lm @full
- Lux: (26° only TU) 1'289 lx; (26° only DY) 1'524 lx; (26°) 2'759lx @5 m full
- CRI: (only TU) 97,7; (only DY) 95,7; (@full) 96.3
- R9: (only TU) 86,2; (only DY) 90,9; (@full) 90,5
- TLCI: (only TU) 97; (only DY) 97; (@full) 98
- TM30 Rf: (only TU) >92; (only DY) >90; (@full) >92
- TM30 Rg: (only TU) >96; (only DY) >99; (@full) <102
- Source life expectancy: > 50.000 h
- Beam angle: optional 5° / 10° / 14° / 19° / 26° / 36° / 50° / 70° / zoom 15°-30° / zoom 25°-50°
- Lens type: HD anti-reflection lenses with achromatic coating
- Focus: manual
- Other: see available accessories
- Colour mixing: warm white + cold white
- White presets: 2.700K - 5.600K
- Rotating gobos: 1 rotating gobo controlled on DMX
- Gobo size: B, outer: 86 mm - image: 64,5 mm - thickness: 1,1 mm
- Static mode: selection of static dimmer
- Manual mode: manual adjustment of dimmer and strobe
- Auto mode: built-in programs with execution speed adjustment
- Special features: HIGH mode, AUTO mode and SILENT mode fan management
- Body: sturdy die-cast aluminium body
- Body colour: black
- Protocols: DMX512, RDM
- DMX channels: 2 / 3 / 4 / 6 / 12channel
- RDM: RDM for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB - DMX interface (UPBOX2) not included
- Master/Slave: for synchronised operation of more units linked in a chain
- Dimmer: linear 0 ~ 100% electronic dimmer
- Strobe / shutter: 1 - 25 Hz, electronic
- Display battery: self-charging battery backup
- Operating temperature: -10° ~ +45°
- LED Control: flicker free operation
- Selectable PWM: 600 ~ 25.000 Hz
- Mains power supply: 100-240V - 50/60Hz
- Max power consumption: 264W
- Output (at 230V): 11 units on a single power line
- Power factor: 0,97
- IP rating: 65 for temporary outdoor application, not for fixed installations
- Cooling: low noise fan
- Suspension and fixing: bracket for hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Seetronic powerCON TRUE IP65 IN/OUT
- Dimensions (WxHxD): 324x540x660mm / 12.76''x21.26''x25.98''
- Weight: 10kg / 22.05lbs
- Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC
- 1 x ECLFWIPVW
- 1 x 1,5 meters power cable (BARE END - SEETRONIC IP65 power connector)
- User Manual
EclProfile FWIPVW
EclProfile FWIP
Waterproofed high quality Full White LED ellipsoidal available in Tungsten and Daylight versions
EclProfile FWIP is the IP Full White version of the new generation of Ecl Profile LED ellipsoidals, and it is available in the TU (tungsten) and DY (daylight) source variants. The EclProfile FWIP has been engineered in the same housing and optical design of the colour mixing versions and for those users who require higher brightness and quality on a specific white point, offering a superior evenness and crisp focus of the new EclProfile range, or simply prefer to operate LED fixtures in a classical way. The LED source for both versions has been selected to achieve the finest quality of whites, having high scores of CRI, R9 and TM30 and being ideal for applications like corporate events, advertising, exhibitions, among others.
Main features:
- IP rated for exterior applications
- Rotating gobo IP65
- 3.200 K (TU) and 5.600 K (DY) versions available
- High lumen output and superior quality of whites (high CRI, TLCI, TM30)
- Silent operation and compatible with industry standard accessories
PHOTO GALLERY
TECHNICAL SPECIFICATIONS
- Source: 91x3W high-power white LED
- CCT: (TU) 3.200 K - (DY) 5.600K
- Luminous flux: (TU) 5°: 6'662 - 10°: 8'005 - 14°: 7'283 lm -19°: 8'704 lm - 26°: 8'944 lm - 36°: 8'996 lm - 50°: 8'286 lm - 70°: 9'670lm @full
- Luminous flux: (DY) 5°: 7'231 - 10°: 8'828 - 14°: 8'061 lm -19°: 7'664 lm - 26°: 9'826 lm - 36°: 9'707 lm - 50°: 9'017 lm - 70°: 11'708 lm @full
- Lux: (TU) 5°: 30'529 - 10°: 14'813 - 14°: 7'197 lx - 19°: 4'218 lx - 26°: 2'459 lx - 36°: 1'323 lx - 50°: 680 lx - 70°: 419lx @5 m full
- Lux: (DY) 5°: 35'955 - 10°: 16'083 - 14°: 7'894 lx - 19°: 4'626 lx - 26°: 2'722 lx - 36°: 1'450 lx - 50°: 766 lx - 70°: 494lx @5 m full
- CRI: (TU) >98; (DY) >97
- R9: (TU) >91; (DY) >97
- TLCI: (TU) >98; (DY) >98
- TM30 Rf: (TU) >94; (DY) >91
- TM30 Rg: (TU) >99; (DY) >99
- Source life expectancy: > 50.000 h
- Beam angle: optional 5° / 10° / 14° / 19° / 26° / 36° / 50° / 70° / zoom 15°-30° / zoom 25°-50°
- Lens type: HD anti-reflection lenses with achromatic coating
- Focus: manual
- Other: see available accessories
- Colour mixing: static white
- Shutter system: 3 layers blades system and fast rehabilitation of blade in case of out of frame blade
- Gobo size: B, outer: 86 mm - image: 64,5 mm - thickness: 1,1 mm
- Static mode: selection of static dimmer
- Manual mode: manual adjustment of dimmer and strobe
- Auto mode: built-in programs with execution speed adjustment
- Special features: HIGH mode, AUTO mode and SILENT mode fan management
- Body: sturdy die-cast aluminium body
- Body colour: black
- Protocols: DMX512, RDM
- DMX channels: 2 / 3 / 4 / 5channel
- RDM: RDM for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB - DMX interface (UPBOX2) not included
- Master/Slave: for synchronised operation of more units linked in a chain
- Dimmer: linear 0 ~ 100% electronic dimmer
- Strobe / shutter: 1 - 25 Hz, electronic
- Display battery: self-charging battery backup
- Operating temperature: -10° ~ +45°
- LED Control: flicker free operation
- Selectable PWM: 600 ~ 25.000 Hz
- Mains power supply: 100-240V - 50/60Hz
- Max power consumption: 264W
- Output (at 230V): 11 units on a single power line
- Power factor: 0,97
- IP rating: 65 for temporary outdoor application, not for fixed installations
- Cooling: low noise fan
- Suspension and fixing: bracket for hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Seetronic powerCON TRUE IP65 IN/OUT
- Dimensions (WxHxD): 324x540x660mm / 12.76''x21.26''x25.98''
- Weight: 10kg / 22.05lbs
- Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC
- 1 x ECLFWIP
- 1 x 1,5 meters power cable (BARE END - SEETRONIC IP65 power connector)
- User Manual
EclProfile FWIP
Waterproofed high quality Full White LED ellipsoidal available in Tungsten and Daylight versions
PRICELISTS
CATALOGUES
