E- SERIES
E-SERIES
Adamson is synonymous with power, durability, and clarity. Decades of research in the world's most demanding performance environments has led to the induction of technology that is unmatched in the field. The E-Series is our flagship product family and represents a huge step forward in large-format line array technology. Outstanding performance paired with lightning fast rigging and truck pack is what defines the E-Series as an industry leader. Demanded by the worlds most recognized productions and installed in world class venues. It reproduces the subtlest nuances of a performance in every seat of every venue, every night.
The Adamson E12 is a 3 way line array enclosure, incorporating proprietary transducer and waveguide technology which reduces weight and minimizes its footprint. The heart of the E12 is the E-Capsule, which is precisely engineered and constructed of lightweight aluminum. The patent pending skeletal structure provides an accurate and rigid frame for mounting the modular aircraft grade steel Autolock™ rigging system, while simultaneously housing ultra-efficient mid-high components coaxially mounted on Adamson’s modified E12 Co-Linear Drive Module.
A vector corrected low-excursion 7” Kevlar Neodymium midrange transducer paired with a next generation 4” HF compression driver energize the drive module and provide seamless mid-high energy with minimized distortion at very high SPL levels. The critically optimized waveguide, based on a prolate-spheroidal geometry ensures precise pattern control and minimum THD, producing a nominal (-6 dB) dispersion pattern of 110° x 8° (H x V). The E-Capsule is flanked with two separate, vented birch ply enclosures, each containing Adamson’s proprietary Kevlar Neodymium 12” woofer, capitalizing on the advantages of Adamson’s Advanced Cone Architecture and optimized heat dissipation management of the 4” voice coil.
SPECIFICATIONS
| Frequency Range (+/-3 dB) | 60 Hz - 18 kHz |
| Nominal Directivity (-6 dB) H x V | 110° x 8° |
| Maximum Peak SPL** | 145 dB |
| Components LF | 2x ND12-S 12" Kevlar Neodymium Driver |
| Components MF | YX7 7" Kevlar Neodymium Driver |
| Components HF | NH4TA2 4" Diaphragm / 1.5" Exit Compression Driver |
| Nominal Impedance LF | 2x 8 Ω |
| Nominal Impedance MF | 8 Ω |
| Nominal Impedance HF | 8 Ω |
| Power Handling (AES / Peak) LF | 2x 800 / 2x 3200 W |
| Power Handling (AES / Peak) MF | 350 / 1400 W |
| Power Handling (AES / Peak) HF | 160 / 640 W |
| Rigging |
Autolock™ Rigging System |
| Connection | 2x Speakon™ NL8 |
| Height Front (mm / in) | 358 / 14.1 |
| Height Back (mm / in) | 282 / 11.1 |
| Width (mm / in) | 1111 /43.75 |
| Depth (mm / in) | 543 / 21.4 |
| Weight (kg / lbs) | 59.9 / 132 |
| Supported Processing | Lake |
ACCESSORIES
 |
E12 Dolly (938-0015) | The precision crafted E12 dolly accommodates 4 stacked E12 cabinets. Incorporating the rear latch of the Autolock™ rigging system, the E12 dolly is a secure and simple way to store and transport your E12 cabinets. The dolly has been designed to fit 4-wide in a standard truck. |
 |
E-Series - Spektrix Underhang (931-0009) | E15/E12 to Spektrix rigging adapter |
 |
E-Frame with Extender Beam (930-0004) | Rigging frame for E15 and E12 Cabinets |
 |
Dolly Stacking Legs (938-0014) | The Dolly Stacking Legs allow for your E-Series or S-Series system to be ground stacked without leaving the Dolly. As the Dolly naturally sits in a downward angle, the stacking legs allow you to elevate your stack to an angle which perfectly suits your particular application. |
 |
E12 Cover 4up (907-0016) | Cover for 4x E12 enclosures stacked on an E12 dolly (938-0015) |
 |
E12 Cover 3up (907-0023) | Cover for 3x E12 enclosures stacked on an E12 dolly (938-0015) |
 |
E-Rack (905-0001) |
A 10U rack mounted with Lab.gruppen PLM amplifiers, Adamson audio and AC panels and an Ethernet switch.
|
| E12 Spec Sheet | One page spec sheet for the Energia E12 | 381.74 KB |
| E-Series Configuration Brochure | A brochure outlining the factory recommended configurations for the E-Series | 7.31 MB |
| E-Series Brochure | The E-Series Full Line Brochure | 3.65 MB |
| E-Rack Brochure | Product Brochure for Adamson's unified rack solution, the E-Rack | 1.99 MB |
| E-Series User Manual | Comprehensive User Manual for the E-Series including proper deployment and rigging | 10.38 MB |
| Lake LoadLibrary V4.2 | Adamson LoadLibrary for Lake Controller 6.X | 28.58 MB |
| 3D Cad Drawings | 3D CAD drawings of all E-Series enclosures | 4.66 MB |
| Adamson Amplification Chart V1.0 | Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. | 231.47 KB |
E12
The Adamson E15 is a 3 way, true line source enclosure, incorporating proprietary transducer and waveguide technology which reduces weight and minimizes the footprint. The heart of the E15 is the E-Capsule, which is precisely engineered and constructed of lightweight aluminum. The patent pending skeletal structure provides an accurate and rigid frame for mounting the modular aircraft grade steel Autolock© rigging system, while simultaneously housing a series of efficient mid-high components coaxially mounted on Adamson’s pioneering Co-Linear Drive Modules.
Two vector corrected low-excursion 7” Kevlar Neodymium midrange transducers paired with two next generation 4” HF compression drivers energize the drive modules and provide seamless mid-high energy with minimized distortion at very high SPL levels. Critically optimized waveguides based on a prolate-spheroidal geometry ensure precise pattern control and minimum THD, producing a nominal (-6 dB) dispersion pattern of 90° x 6° (H x V). The E-Capsule is flanked with two separate, vented birch ply enclosures, each containing Adamson’s proprietary Kevlar Neodymium 15” woofer, capitalizing on the advantages of Adamson’s Advanced Cone Architecture and optimized heat dissipation management of the 4” voice coil.
SPECIFICATIONS
| Frequency Range (+/-3 dB) | 60 Hz - 18 kHz |
| Nominal Directivity (-6 dB) H x V | 90° x 6° |
| Maximum Peak SPL** | 147 dB |
| Components LF | 2x ND15-L 15" Neodymium Kevlar Driver |
| Components MF | 2x YX7 7" Kevlar Neodymium Driver |
| Components HF | 2x NH4TA2 4" Diaphragm / 1.5" Exit Compression Driver |
| Nominal Impedance LF | 2x 8 Ω |
| Nominal Impedance MF | 16 Ω |
| Nominal Impedance HF | 16 Ω |
| Power Handling (AES / Peak) LF | 2x 800 / 2x 3200 W |
| Power Handling (AES / Peak) MF | 700 / 2800 W |
| Power Handling (AES / Peak) HF | 320 / 1280 W |
| Rigging |
Autolock™ Rigging System |
| Connection | 2x Speakon™ NL8 |
| Height Front (mm / in) | 391 / 15.4 |
| Height Back (mm / in) | 333 / 13.125 |
| Width (mm / in) | 1306 / 51.4 |
| Depth (mm / in) | 544 / 21.4 |
| Weight (kg / lbs) | 79.8 / 176 |
| Supported Processing | Lake |
**12 dB crest factor pink noise at 1m, free field, using specified processing and amplification
ACCESSORIES
 |
E-Frame with Extender Beam (930-0004) | Rigging Frame with Extender Beam for E15 and E12 enclosures. |
 |
E-Series - Spektrix Underhang (931-0009) | Suspends SpekTrix enclosures from E-Series 3-way line source enclosures. |
 |
E15 Dolly (938-0004) | The precision crafted E15 dolly accommodates 4 stacked E15 cabinets. Incorporating the rear latch of the Autolock™ rigging system, the E15 dolly is a secure and simple way to store and transport your E15 cabinets. The dolly has been designed to fit 4-wide in a standard truck. |
 |
Dolly Stacking Legs (938-0014) | The Dolly Stacking Legs allow for your E-Series or S-Series system to be ground stacked without leaving the Dolly. As the Dolly naturally sits in a downward angle, the stacking legs allow you to elevate your stack to an angle which perfectly suits your particular application. |
 |
E15 Cover 4up (907-0015) | Cover for 4x E15 enclosures stacked on an E15 dolly (938-0004) |
 |
E15 Cover 3up (907-0019) | Cover for 3x E15 enclosures stacked on an E15 dolly (938-0004) |
 |
E-Rack (905-0001) | A 10U rack mounted with Lab.gruppen PLM amplifiers, Adamson audio and AC panels and an Ethernet switch. |
DOWNLOADS
| E15 Spec Sheet | One page spec sheet for the E15 | 425.14 KB |
| E-Series Configuration Brochure | A brochure outlining the factory recommended configurations for the E-Series | 7.31 MB |
| E-Series Brochure | The E-Series Full Line Brochure | 3.65 MB |
| E-Rack Brochure | Product Brochure for Adamson's unified rack solution, the E-Rack | 1.99 MB |
| E-Series User Manual | Comprehensive User Manual for the E-Series including proper deployment and rigging | 10.38 MB |
| Lake LoadLibrary V4.2 | Adamson LoadLibrary for Lake Controller 6.X | 28.58 MB |
| 3D Cad Drawings | 3D CAD drawings of all E-Series enclosures | 4.66 MB |
| Adamson Amplification Chart V1.0 | Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. | 231.47 KB |
 |
 |
 |
E15
The E119 Subwoofer was developed to bolster the low-end of the E-Series line of products. The enclosure is loaded with a light weight, long excursion, 19” SD19 Kevlar Neodymium driver utilizing Adamson’s Advanced Cone Architecture and Symmetrical Drive Technology. The driver employs a dual 5” voice coil for exceptional power handling, with a dual-spider suspension system for extra stability even under extreme excursion. It is mounted in an ultra-efficient front-loaded enclosure, designed to reproduce clean, musical low frequency information. Users will appreciate the lower fundamental notes of this design.
The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with four Speakon™ NL4 connectors, two parallel In/Out rear plugs and two dedicated cardioid input connecters in the front. The integrated rigging system allows for either 0° or 3° splay between adjacent cabinets. The E119 can travel on installed casters, or on a 3-high covered dolly.
| Frequency Range (+/-3 dB) | 30 Hz - 60 Hz |
| Maximum Peak SPL** | 138 |
| Components LF | SD19 19" Kevlar Neodymium Driver |
| Nominal Impedance LF | 8Ω |
| Power Handling (AES / Peak) LF | 1600 / 6400 W |
| Rigging |
Integrated Rigging System |
| Connection | 4x Speakon™ NL4: 2x Rear Parallel (Pins 1 +/-) and 2x Front Cardioid Input (Pin 2 to 1) |
| Height Front (mm / in) | 572 / 22.5 |
| Width (mm / in) | 749 / 29.5 |
| Depth (mm / in) | 889 / 35 |
| Weight (kg / lbs) | 66.5 / 146.5 |
| Supported Processing | Lake |
**12 dB crest factor pink noise at 1m, half space, using specified processing and amplification
ACCESSORIES
 |
E-Frame Sub (930-0023) | Suspension frame for all E-Series subwoofers |
 |
E-Rack (905-0001) | A 10U rack, mounted with Lab.gruppen PLM+ amplifiers, Adamson audio and AC panels and an Ethernet switch |
DOWNLOADS
| E119 Spec Sheet | One page spec sheet for the E119 | 426.06 KB |
| E-Series Configuration Brochure | A brochure outlining the factory recommended configurations for the E-Series | 7.31 MB |
| E-Series Brochure | The E-Series Full Line Brochure | 3.65 MB |
| E-Rack Brochure | Product Brochure for Adamson's unified rack solution, the E-Rack | 1.99 MB |
| E-Series User Manual | Comprehensive User Manual for the E-Series including proper deployment and rigging | 10.38 MB |
| Lake LoadLibrary V4.2 | Adamson LoadLibrary for Lake Controller 6.X | 28.58 MB |
| 3D Cad Drawings | 3D CAD drawings of all E-Series enclosures | 4.66 MB |
| Adamson Amplification Chart V1.0 | Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. | 231.47 KB |
CONFIGURATIONS
 |
 |
 |
E119
The E219 can be ground stacked or flown utilizing the E-Frame Full Line Adapter. The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with three Speakon™ NL8 connectors, two parallel In/Out plugs and one dedicated output connection to optimize speaker cabling. The integrated rigging system allows for either 0° or 3° splay between adjacent cabinets.
SPECIFICATIONS
| Frequency Range (+/-3 dB) | 28 Hz - 90 Hz |
| Maximum Peak SPL** | 144 |
| Components LF | 2x SD19 19" Kevlar Neodymium Driver |
| Nominal Impedance LF | 2x 8 Ω |
| Power Handling (AES / Peak) LF | 2x 1600 / 6400 W |
| Rigging |
Integrated Rigging System |
| Connection | 3x Speakon™ NL8 |
| Height Front (mm / in) | 597 / 23.5 |
| Width (mm / in) | 1440 / 56.7 |
| Depth (mm / in) | 889 / 35 |
| Weight (kg / lbs) | 106.6 / 235 |
| Supported Processing | Lake |
**12 dB crest factor pink noise at 1m, half space, using specified processing and amplification
ACCESSORIES
 |
E-Frame Full Line (930-0019) | Suspension frame for E219, E218, E15 and E12 enclosures. Ground stack compatible |
 |
E219 Dolly (938-0017) | Transports up to 3x E219 subwoofers |
 |
E219 Single Dolly/Cover Kit (939-0003) | 1x dolly and 1x cover for E219 - Single subwoofer |
 |
E219 Cover (907-0020) | Cover for 3x E219 subwoofers stacked on an E219 Dolly (938-0017) |
 |
E-Rack (905-0001) | A 10U rack mounted with Lab.gruppen PLM amplifiers, Adamson audio and AC panels and an Ethernet switch. |
DOWNLOADS
| E219 Spec Sheet | One page spec sheet for the E219 | 208.47 KB |
| E-Series Configuration Brochure | A brochure outlining the factory recommended configurations for the E-Series | 7.31 MB |
| E-Series Brochure | The E-Series Full Line Brochure | 3.65 MB |
| E-Rack Brochure | Product Brochure for Adamson's unified rack solution, the E-Rack | 1.99 MB |
| E-Series User Manual | Comprehensive User Manual for the E-Series including proper deployment and rigging | 10.38 MB |
| Lake LoadLibrary V4.2 | Adamson LoadLibrary for Lake Controller 6.X | 28.58 MB |
| 3D Cad Drawings | 3D CAD drawings of all E-Series enclosures | 4.66 MB |
| Adamson Amplification Chart V1.0 | Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. | 231.47 KB |
CONFIGURATIONS
 |
 |
 |
E219
The E218 subwoofer was developed to pair with the E12 or E15 enclosures. Two light-weight, long excursion ND18-S Kevlar Neodymium drivers which utilize Adamson’s Advanced Cone Architecture are mounted in an efficient band-pass subwoofer. The design achieves a remarkable reduction of the rearward radiated energy without dedicated cardioid setups and algorithms. A typical user would appreciate the sonic attack of this design.
The E218 can be used ground stacked or flown utilizing the E-Frame Full Line Adapter. The frame also allows the E218, E219 and E12/E15 enclosures to be flown in the same array.
The E218 is constructed of (marine) birch plywood as well as aircraft grade steel and aluminum and is equipped with three Speakon NL8 connectors, two parallel in / out plugs and one dedicated output connection point for efficient cable usage. The integrated rigging system allows for either 0° or 3° splay between adjacent enclosures.
SPECIFICATIONS
**12 dB crest factor pink noise at 1m, half space, using specified processing and amplification
ACCESSORIES
 |
E-Frame Full Line Adapter (930-0019) | Suspension frame for E219, E218, E15 and E12 enclosures. Ground stack compatible |
 |
E218 Dolly (938-0016) | Transports up to 3x E218 subwoofers |
 |
E218 Caster / Cover Kit (939-0001) | 4x Casters to affix to the back of the subwoofer and a single cover |
 |
E218 3up Cover (907-0017) | Cover for 3x E218 subwoofers stacked on an E218 Dolly (938-0016) |
 |
E-Rack (905-0001) | A 10U rack, mounted with Lab.gruppen PLM+ amplifiers, Adamson audio and AC panels and an Ethernet switch |
DOWNLOADS
| E218 Spec Sheet | One page spec sheet for the E218 | 377.25 KB |
| E-Series Brochure | The E-Series Full Line Brochure | 3.65 MB |
| E-Rack Brochure | Product Brochure for Adamson's unified rack solution, the E-Rack | 1.99 MB |
| E-Series User Manual | Comprehensive User Manual for the E-Series including proper deployment and rigging | 10.38 MB |
| Lake LoadLibrary V4.2 | Adamson LoadLibrary for Lake Controller 6.X | 28.58 MB |
| 3D Cad Drawings | 3D CAD drawings of all E-Series enclosures | 4.66 MB |
| Adamson Amplification Chart V1.0 | Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. | 231.47 KB |
