STUDIO MONITORS
Your every day companions
M4M is a Multimedia Bluetooth Monitor system designed for use in pairs, where one module is equipped with amplifier, inputs, and controls, and supplies power and audio signal to the second passive module.
This stereo kit is characterized by the versatility of inputs, which multiplies the possibilities of use for this evolution of the classic studio monitor. There are balanced RCA and TRS inputs, an auxiliary input with a minijack connection, and also a Bluetooth receiver, which makes the system perfect for multimedia playback.
On the back of the primary module, you'll find EQ controls for adjusting high and low frequencies.
Note that on-board controls such as main volume, power switch, the Bluetooth pairing button, and even the AUX Input and headphones OUT are conveniently located in the front of the primary unit for ease of access.
A series of small design solutions that combine the reproduction quality needed for professional use with the small conveniences needed for a chill-out listening experience in the tranquility of your own home.
Features
- Kit of 2 Speakers (1x active, 1x passive)
- 4" Woofers, reinforced glass fiber
- SPL 109 dB
- Frequency Response 66 Hz-23 kHz
- Bluetooth 5.0
- 140.6 x 201.6 x 174.5 mm
Montarbo - M4M
The Evolution of Studio Monitors
M6M is a Multimedia Bluetooth Monitor system designed for use in pairs, where one module is equipped with amplifier, inputs, and controls, and supplies power and audio signal to the second passive module.
This stereo kit is characterized by the versatility of inputs, which multiplies the possibilities of use for this evolution of the classic studio monitor. There are balanced RCA and TRS inputs, an auxiliary input with a minijack connection, and also a Bluetooth receiver, which makes the system perfect for multimedia playback.
On the back of the primary module, you'll find EQ controls for adjusting high and low frequencies.
Note that on-board controls such as main volume, power switch, the Bluetooth pairing button, and even the AUX Input and headphones OUT are conveniently located in the front of the primary unit for ease of access.
A series of small design solutions that combine the reproduction quality needed for professional use with the small conveniences needed for a chill-out listening experience in the tranquility of your own home.
Features
- Kit of 2 Speakers (1x active, 1x passive)
- 6.5" Woofers, reinforced glass fiber
- SPL 111 dB
- Frequency Response 40 Hz-22 kHz
- Bluetooth 5.0
- 250 x 430 x 237 mm
TECHNICAL SPECIFICATIONS
General
Speaker Type | 2-way bass reflex |
Dimensions | 250 x 430 x 237 mm (9.8” x 16.9” x 9.3”) |
Weight | 8.5 kg (18.74 lbs) + 6.2 kg (13.668 lbs) |
Cabinet | MDF, front panel ABS |
Acoustical Data
Frequency Response [-10 dB] | 40 Hz-22 kHz |
Max SPL | 111 dB |
LF | 6.5” custom woofer, reinforced fibreglass cone |
HF | 1" tweeter silk dome |
Crossover | 1650Hz |
Electronics
Amp Class | A/B |
Peak Power | 30 W + 30 W |
Signal Processing | Analogue, active electronic crossover active transducer protection circuit |
Operating Voltage | 110-120V~ 50-60Hz 220-240V~ 50-60Hz |
I/O & Controls
I/O | 2 x TRS Balanced 2 x RCA unbalanced AUX IN: 3,5 mm Headphones OUT: 3,5 mm |
Controls | MAIN Level EQ: Low / High Bluetooth® Button |
Bluetooth | Yes, V 5.0 |
Montarbo - M6M
M8M is a Multimedia Bluetooth Monitor system designed for use in pairs, where one module is equipped with amplifier, inputs, and controls, and supplies power and audio signal to the second passive module.
This stereo kit is characterised by the versatility of inputs, which multiplies the possibilities of use for this evolution of the classic studio monitor. There are balanced RCA and TRS inputs, an auxiliary input with a minijack connection, and also a Bluetooth receiver, which makes the system perfect for multimedia playback.
On the back of the primary module, you'll find EQ controls for adjusting high and low frequencies.
Note that on-board controls such as main volume, power switch, the Bluetooth pairing button, and even the AUX Input and headphones OUT are conveniently located in the front of the primary unit for ease of access.
A series of small design solutions that combine the reproduction quality needed for professional use with the small conveniences needed for a chill-out listening experience in the tranquility of your own home.
Features
- Kit of 2 Speakers (1x active, 1x passive)
- 8" Woofers, reinforced glass fiber
- SPL 113 dB
- Frequency Response 35 Hz-22 kHz
- Bluetooth 5.0
- 310 x 524,5 x 280 mm
Product Code: 1702000010
TECHNICAL SPECIFICATIONS
General
Speaker Type | 2-way bass reflex |
Dimensions | 310 x 524.5 x 280 mm (12.2” x 20.6” x 11”) |
Weight | 11.3 kg (24.92 lbs) + 8.5 kg (18.74 lbs) |
Cabinet | MDF, front panel ABS |
Acoustical Data
Frequency Response [-10 dB] | 35 Hz-22 kHz |
Max SPL | 113 dB |
LF | 8” custom woofer, reinforced fibreglass cone |
HF | 1" tweeter silk dome |
Crossover | 1450Hz |
Electronics
Amp Class | A/B |
Peak Power | 50 W + 50 W |
Signal Processing | Analogue, active electronic crossover active transducer protection circuit |
Operating Voltage | 110-120V~ 50-60Hz 220-240V~ 50-60Hz |
I/O & Controls
I/O | 2 x TRS Balanced 2 x RCA unbalanced AUX IN: 3,5 mm Headphones OUT: 3,5 mm |
Controls | MAIN Level EQ: Low / High Bluetooth® Button |
Bluetooth | Yes, V 5.0 |
Montarbo - M8M
Montarbo® WIND PRO 212A is an active acoustic loudspeaker designed to guarantee extremely ..
AUDIO INTERFACES
Your Desktop companion
An essential piece of kit for a home recording studio setup, DSI sound interfaces allow for a smooth, user-friendly connection from a laptop to essential studio equipment, microphones or instruments, without compromising on recording quality.
Indeed, DSI’s microphone preamps and high-resolution converters (up to 24-bit / 192kHz), guarantee a clear and pristine sound, low noise level and a wide dynamic range to capture any detail of recordings. Moreover, a dedicated ASIO driver helps to significantly reduce latency times.
Featuring 2 combo Inputs with Phantom Power and Instrument swithches, plus monitor and headphone outputs, DSI-22 interface work seamlessly with Mac or PC, and its design allows for quick access to onboard controls and connectors (gain, monitor and headphones levels) from the front panel. DSI 22 also features a MIX knob enabling users to adjust headphones balance between the Input signals and the recorded signal, which is extremely useful for monitoring purposes.
The compact and lightweight design perfectly fits any on-the-go music production and recording requirement.
DSI interfaces comes with a USB cable and a 6.35mm to 3.5mm stereo adapter included. In order to use DSI interfaces on Windows please install the provided drivers (Drivers compatiblity: Windows 10, 32 bit or 64 bit)
Features
- 1x XLR / TRS Combo Inputs
- 2x balanced TRS outputs
- headphones stereo output
- 24-bit / 192 kHz
- MIX (Direct Input/Playback) knob
- USB bus Powered
- Mac and PC Compatible
- 94 x 61 x 112mm
- 450 gr
TECHNICAL SPECIFICATIONS
General
USB Bus Powered | Yes (USB 2.0 B-Type) |
Enclosure | Metal Housing |
Dimensions | 94mm x 61mm x 112mm |
Weight | 450g |
Provided accessories | USB A to USB B cable 6.35mm to 3.5mm stereo adapter |
Compatibility | Mac OS and Windows |
Input & Controls
Input | 1 x Combo XLR / TRS 6.35mm |
Output | 2 x TRS Monitor Out 1x Stereo Headphone out |
Controls | 1 x Input Gain Monitor Volume Headphones Volume |
Switch buttons | 1x Line / Instrument 48V Phantom ON/OFF MONO ON/OFF |
DSP
Signal Processing | 24-bit / 192 kHz Converters |
Montarbo - DSI12
The core of your Recording Studio
An essential piece of kit for a home recording studio setup, DSI sound interfaces allow for a smooth, user-friendly connection from a laptop to essential studio equipment, microphones or instruments, without compromising on recording quality.
Indeed, DSI’s microphone preamps and high-resolution converters (up to 24-bit / 192kHz), guarantee a clear and pristine sound, low noise level and a wide dynamic range to capture any detail of recordings. Moreover, a dedicated ASIO driver helps to significantly reduce latency times.
Featuring 2 combo Inputs with Phantom Power and Instrument swithches, plus monitor and headphone outputs, DSI-22 interface work seamlessly with Mac or PC, and its design allows for quick access to onboard controls and connectors (gain, monitor and headphones levels) from the front panel. DSI 22 also features a MIX knob enabling users to adjust headphones balance between the Input signals and the recorded signal, which is extremely useful for monitoring purposes.
The compact and lightweight design perfectly fits any on-the-go music production and recording requirement.
DSI interfaces comes with a USB cable and a 6.35mm to 3.5mm stereo adapter included.
Driver compatiblity: Windows 10, 32 bit or 64 bitFeatures
- 2x XLR / TRS Combo Inputs
- 2x balanced TRS outputs
- headphones stereo output
- 24-bit / 192 kHz
- MIX (Direct Input/Playback) knob
- USB bus Powered
- Mac and PC Compatible
- 190 x 61 x 112 mm
- 790 gr
TECHNICAL SPECIFICATIONS
General
USB Bus Powered | Yes (USB 2.0 B-Type) |
Enclosure | Metal Housing |
Dimensions | 190mm x 61mm x 112mm |
Weight | 790g |
Provided accessories | USB A to USB B cable, 6.35mm to 3.5mm stereo adapter |
Compatibility | Mac OS and Windows |
Input & Controls
Input | 2 x Combo XLR / TRS 6.35mm |
Output | 2 x TRS Monitor Out 1x Stereo Headphone out |
Controls | 2 x Input Gain Monitor Volume MIX (Input/Playback) Headphones Volume |
Switch buttons | 2x Line / Instrument 48V Phantom ON/OFF MONO ON/OFF |
DSP
Signal Processing | 24-bit / 192 kHz Converters |
Montarbo - DSI22
MICROPHONES
Studio sound everywhere you go
MM500X is a wide-diaphragm condenser microphone providing extended frequency response and wide dynamics.
This is a device allowing professional users to capture in full detail all the vocals' subtle nuances as well as the full richness of an acoustic instrument like a guitar or piano.
Equipped with 48V phantom power and featuring a cardioid polarity, the MM500X allows high-quality recordings even in challenging environmental conditions and captures distortion-free high sound pressures from amplifiers, horns, and percussion instruments.
MM500X comes with a swivel mount with a locking ring nut to easily attach the microphone to a stand or tabletop stand, plus a heavy-duty neoprene case..
Features
- Wide diaphragm condenser capsule
- Cardioid polar pattern
- 130dB Max SPL Handling
- Professional grade quality
- Heavy-duty neoprene case included
- Swivel mount included
TECHNICAL SPECIFICATIONS
Acoustics
Acoustical Operating Principal | Pressure Gradient Transducer |
Polar Pattern | Cardioid |
Frequency Range | 30Hz ~20.000Hz |
Sensitivity | 13 mV/Pa |
Impedance | 200 Ohm |
S/N Ratio (Ref. 1Pa A-weighted) | 80dB |
Equivalent Noise Level (A-weighted IEC 268-4) | 20dB |
MAX SPL (0.5% THD) | 130dB |
General
Power Requirements | 48V ± 4V, Phantom Power |
Dimensions | Ø60 x 162 mm |
Weight (microphone only) | 548 g |
Finish | Matte Black |
Provided accessories | Swivel mount with a locking ring nut Heavy-duty neoprene case |
Montarbo - MM500X
Capture Everything
MM500 U is the USB version of the condenser microphone, designed for quick operations with a direct connection to a computer (PC or Mac) with no need for an audio interface. The ideal solution for podcasts or live music streaming, but also for fast audio recordings keeping an eye on audio quality.MM500 U features a headphones output and a knob for the headphone volume, plus a dedicated switch allowing users to choose between monitoring audio in real-time or listening to instrumental playback while performing.
The MM500 U microphone comes complete with a swivel mount, metal table stand and a 1.2m USB cable included: everything you need to set up high-quality audio streaming or recording in seconds.
Features
- High Quality USB microphone
- Condenser capsule
- Cardioid polar patterne
- Headphone out On-board
- 120dB Max SPL
- Professional grade quality
- table stand included
TECHNICAL SPECIFICATIONS
Acoustics
Type | USB powered Condenser Microphone |
Acoustical Operating Principal | Pressure Gradient Transducer |
Polar Pattern | Cardioid |
Frequency Range | 50Hz ~18.000Hz |
Sensitivity | -60dB ± 5dB (1V/u bar) |
S/N Ratio (Ref. 1Pa A-weighted) | 59dB |
MAX SPL (0.5% THD) | 120dB |
General
Power Requirements | USB (bus powered) |
Dimensions | Ø65 x 162 mm |
Weight (microphone only) | 470g |
Controls | 1x Volume/Mute knob |
Output | 1x Headphone output built-in |
Finish | Matte Black |
Provided accessories | Swivel mount Metal table stand 1.2M USB cable |