AMPLIFIERS & MIXERS
AMPLIFIERS
DZ1604 is a medium power multichannel amplifier with a good sound quality at competitive costs.
New class D DZ1604, with a power of 4x400W @ 4Ohm, is the ideal solution for medium sound reinforcement applications.
-
Channels: 4
-
Circuit class: digital
-
Single channel power: 300/400W 8/4 Ohm
-
Bridge mode power: 2x600W 8 Ohm
-
Frequency responce: 20 - 20000Hz @ 8 Ohm (±0.5 dB)
-
THD+N: <0.1%
-
Damping factor >200
-
Input impedance: 10kΩ
-
Signal/Noise rate: >100dB
-
Type: Switching
-
Operating voltage/frequency: 230V (+/- 5%) 50Hz
-
Output: Soft-start, short circuit, DC, overheat
-
Input mode: stereo, parallel, bridge
-
Input sensitivity: 1Vrms
-
Indicators: signal, limiter
-
Input signal:XLR in
-
Output signal: binding post
-
Power connection: VDE
-
Cooling: forced air with fan
-
Dimensions (WxHxD): 483x44x280mm
-
Rack unit: 1
-
Weight: 5kg
DZ1604
DZ802 is an amplifier 1 unit rack and 2 channels. It combines good sound quality at competitive costs.
New class D DZ802, with a power of 2x400W @ 4 Ohm, is the ideal solution for medium sound reinforcement applications.
-
Channels: 2
-
Circuit class: digital
-
Single channel power: 300/400W 8/4 Ohm
-
Bridge mode power: 600W 8 Ohm
-
Frequency responce: 20 - 20000Hz @ 8 Ohm (±0.5 dB)
-
THD+N: <0.1%
-
Damping factor: >200
-
Input impedance: 10kΩ
-
Signal/Noise rate: >100dB
-
Type: Switching
-
Operating voltage/frequency: 230V (+/- 5%) 50Hz
-
Output: Soft-start, short circuit, DC, overheat
-
Input mode: stereo, bridge
-
Input sensitivity: 1Vrms
-
Indicators: signal, limiter
-
Input signal: XLR in/out
-
Output signal: 3 x 4 pole out
-
Power connection: VDE
-
Cooling: forced air with fan
-
Dimensions (WxHxD): 483x44x165mm
-
Rack unit: 1
-
Weight: 2kg
DZ802
DZ802 is an amplifier 1 unit rack and 2 channels. It combines good sound quality at competitive costs.
New class D DZ802, with a power of 2x400W @ 4 Ohm, is the ideal solution for medium sound reinforcement applications.
-
Channels: 2
-
Circuit class: digital
-
Single channel power: 300/400W 8/4 Ohm
-
Bridge mode power: 600W 8 Ohm
-
Frequency responce: 20 - 20000Hz @ 8 Ohm (±0.5 dB)
-
THD+N: <0.1%
-
Damping factor: >200
-
Input impedance: 10kΩ
-
Signal/Noise rate: >100dB
-
Type: Switching
-
Operating voltage/frequency: 230V (+/- 5%) 50Hz
-
Output: Soft-start, short circuit, DC, overheat
-
Input mode: stereo, bridge
-
Input sensitivity: 1Vrms
-
Indicators: signal, limiter
-
Input signal: XLR in/out
-
Output signal: 3 x 4 pole out
-
Power connection: VDE
-
Cooling: forced air with fan
-
Dimensions (WxHxD): 483x44x165mm
-
Rack unit: 1
-
Weight: 2kg
DZ802
MIXERS
MX04USB
MX04USB is a versatile mixer with 4 inputs and 2 outputs. It's equipped with player that accepts FLAC WMA APE MP3 formats - with display and Bluetooth connection.
It's provided with low-noise quality preamps, an effective 3-band equalizer and phantom power.
Two channels can be adjusted independently and another 2 can be used as stereo channels.
The master section of the mixer has 1 effect loop, balanced 6.35 mm jack outputs, monitor outputs, as well as a headphone connection. MX04USB is also equipped with RCA connectors for recording devices.
Features:
Channels: 4 input - 2 output
Media player: MP3 FLAC WMA APE player - Bluetooth
Effects: Reverber
Phantom power: 48 V
Phone output: 350 mW
60 mm fader
-
Channels: 4 input - 2 output
-
Mic input: Balanced
-
Gain range: +6 dB /+ 60dB dB
-
SN/R: 120dB
-
Line input: Balanced
-
Gain range: -14 /+ 40dB
-
SN/R: 95dB
-
Stereo Channels: Balanced, Ch 3-4
-
Gain range: -20 /+10dB
-
Type: MP3 FLAC WMA APE player - Bluetooth
-
Frequency responce: 20 to 25.000 Hz +-1dBHz
-
Output level/impedance: +26 dBu bal./+22 dBu unbal./600 Ohm
-
Tape out: +22 dBu unbalanced
-
Phones output: 350 mW/(150 - 600)Ohm
-
Type: External power supply
-
Operating voltage/frequency: 100/240V, 50/60Hz
-
Reverberation: Yes
-
Tone controls input: 80 Hz, 2.5kHz, 12kHz (±15dB)
-
Phantom power: Ch1-2 / 48V
-
Indicators: peak in, output -10dB, -6dB, -2dB, 0dB, +6dB
-
Input signal: XLR/Jack bal. pin RCA unbal
-
Output signal: jack 6.35 mm
-
Power connection: VDE
-
Dimensions (WxHxD):221x45x240mm
-
Weight: 1.9kg
MX04USB
MX07USB
MX07USB is a versatile mixer with 7 inputs and 2 outputs. It's equipped with player that accepts FLAC WMA APE MP3 formats - with display and Bluetooth connection.
It's provided with low-noise quality preamps, an effective 3-band equalizer and phantom power.
Two channels can be adjusted independently and another 2 can be used as stereo channels.
The master section of the mixer has 1 effect loop, balanced 6.35 mm jack outputs, monitor outputs, as well as a headphone connection. MX07USB is also equipped with RCA connectors for recording devices.
Features:Channels: 7 input - 2 output
Media player: MP3 FLAC WMA APE player - Bluetooth
Effects: Reverber
Phantom power: 48 V
Phone output: 350 mW
60 mm fader
-
Channels: 7 input - 2 output
-
Mic input: Balanced
-
Gain range: +6 dB /+ 60dB dB
-
SN/R: 120dB
-
Line input: Balanced
-
Gain range: -14 /+ 40dB
-
SN/R: 95dB
-
Stereo Channels: Balanced, Ch 6-7
-
Gain range: -20 /+10dB
-
Type: MP3 FLAC WMA APE player - Bluetooth
-
Frequency responce: 20 to 25.000 Hz +-1dBHz
-
Output level/impedance: +26 dBu bal./+22 dBu unbal./600 Ohm
-
Tape out: +22 dBu unbalanced
-
Phones output: 350 mW/(150 - 600)Ohm
-
Type: External power supply
-
Operating voltage/frequency: 100/240V, 50/60Hz
-
Reverberation: Yes
-
Tone controls input: 80 Hz, 2.5kHz, 12kHz (±15dB)
-
Phantom power: Ch1-2-3-4-5/48V
-
Indicators: peak in, output -10dB, -6dB, -2dB, 0dB, +6dB
-
Input signal: XLR/Jack bal. pin RCA unbal
-
Output signal: jack 6.35 mm
-
Power connection: VDE
-
Dimensions (WxHxD): 331x45x240mm
-
Weight: 2.6kg
MX07USB
Gallery
Catalogue
