Programmable central unit MTA816PRO to control and manage the multiroom audio system, equipped with balanced inputs and outputs: 8 inputs (on main unit) + 6 local audio inputs (one for each zone), 6 outputs/zones which can be extended up to 48 by adding up 7 expansion units MTAE816PRO.

The central unit is equipped with a powerful microprocessor which enables the digital control of all the zone parameters both centrally on the front panel and by remote control units.

Functions supported:

• zone and source on/off
• audio sources selection
• volume control
• bass and treble
• balance
• mute
• loudness
• sleep
• function control for the audio sources equipped with STIF devices

The central unit has further features that makes it extremely flexible:

• room name customization
• stereo or mono output configuration
• programmable weekly alarms
• paging management from paging station
• up to 14 programmable priority levels relating to the inputs for managing music, microphones (general paging and alarm messages), pre-recorded messages (for providing information or alarms)

The central unit is equipped with Ethernet and RS232 interfaces and can be controlled by PC using suitable software, by Smartphone and Tablet with our APP, or interfaced with any advanced home automation system; it is ideal for scenarios and events that are started via software or simply by programmable triggers.

Features:

• Programmable audio matrix digitally controlled by a 32 bit processor
• Firmware can be updated through Ethernet interface
• Internal clock and date are updated even without power supply
• LCD graphic display with adjustable colour backlighting (RGB).
• Menu-based controls with touch keys for: OK/Cancel, Up/Down and Slider for changing settings
• Rapid access to the most often used functions via the front panel: on/off, source selector, volume control
• Supported languages: English, Italian
• 8 balanced AUX inputs (CD, DVD, HD, SAT, TUNER, etc.), input impedance 47 kohm, sensitivity selectable from 0.5 to 2 V RMS, removable terminals
• 1 balanced audio input on each zone; input impedance 10 kohm; sensitivity from 1 to 4.25 V RMS
• 6 balanced outputs , removable terminals, 1 V RMS signal
• 8 sockets for extra STIF function control devices
• 1 RJ45 Ethernet interface connector
• 1 DB9 RS232 interface connector
• Bus connector for expansions (up to 7 for a total of 48 zones)
• Built-in stabilized power supply, low noise, short-circuit protection, 24 V dc
• 12 trigger inputs, normally-open contacts for external events.
• 6 programmable relay outputs for general purposes.

Suitable for installation on standard 19” rack units; 2 rack units (using GRK2U supports).

Power supply: 110÷230 Vac 50÷60 Hz

Colour: Black

Dimensions: H 88 x W 430 x D 320 mm

Weight: 6,3 kg

WEB SERVER Mondo T
The Mondo T main units are fitted with integrated web servers that enable remote control of the zones directly via a web browser on a PC or a Smartphone.
Optimized for iPod®/iPhone®: you can add an icon for direct access among the programs installed in the device.
The graphics and surfing are designed to suit Apple®’s interfacing standards.
Also compatible with latest-generation Smartphones.
For each zone you can control: volume, on/off, current sound source, muting.

• System requirements: Wi-Fi network infrastructure
• Recommended browsers: Apple Safari®, Google Chrome®
• Recommended Smartphones: iPhone® (iPod®) or others based on the Android® OS

PC-SOFTWARE

1. SIMPLY MT: Software for controlling via a PC. For use with Windows 2000 or later. The software allows to control the main audio parameters of each zone: volume; bass and treble; balance; source selection; function control; sleeping; mute; on-off; name of zone or room; name of sound source.
2. PROG MT: Software to program systems via PC. For Windows 2000 and later versions.

Digital in-wall control unit CZ830.
For selecting A/V sources and adjusting audio settings in the room.

Main functions:

• Zone on/off
• Source selection
• Function change for sound sources
• Volume, bass, treble and balance control
• Timer for sleep function (for switching off automatically after a preset time interval)
• Priority for alarm messages

Graphic OLED display with automatically variable brightness and low-consumption mode.
Built-in IR receiver for the total control of all the zone parameters and A/V sources functions (sources equipped with STIF device) through IR remote control.

Viewing RDS radio informations and MP3 player files of S2R2UT source.

The zone settings and source settings are adjusted by means of menus, using a joystick.
Several control units can be installed in the same room.

Power supply: 24 Vdc

Dimensions: 35 x 35 x 50 mm

NOTES: the module is compatible with electrical mounting boxes and cover plates, it can be installed on rectangular or round or square boxes, using one of the specific command adapters.

METMC8C

Paging station for voice calls for 8 zones selectable, or general emergency calls (all zones).
More zones available using the expansions MET8TZ or MET16TZ.

• EN54-16 certified
• Pre-recorded emergency messages sendable
• System status display
• Digital bus for communication with control units
• Compatible with MET8CV8, MET8CV4, METCUBE

Power supply: 24 Vdc

Overall dimensions: H55 x W205 x D190 mm

Weight: 2.1 kg

Main unit complete with monitoring and displaying system MET8CV8 for voice evacuation.
The system is designed for connecting 8 single 100 V speaker lines.
Optional interface MET8SC available for doubling the lines.
Expandable system (up to 128 lines / zones) adding MET8CVE8 expansions.
System setup and managing by COMETA software.
Free download control app for sound diffusion available in free download.

• EN54-16 certified
• Built-in microphone and pre recorded messages that can be activated from the front panel or remotely
• Possibility of sending messages/calls simultaneously on multiple zones
• 4 monitored analog inputs + 8 unmonitored analog inputs
• 16 monitored trigger inputs for activating events (alarm, evacuation, etc) from the fire alarm central unit or other devices
• Main unit complete with 540 W power supply
• USB connector for firmware upgrades and configurations
• SD card reader to store EVAC messages and messages linked to events
• Digital bus evac bus dedicated for emergency paging stations (eg. METMC8C, METMC1A)
• Bus remote bus for interfacing with zone audio controls (eg. CZ830)
• RS232 serial port and Ethernet port
• Supports Modbus over TCP/IP
• Metal case designed for standard rack mounting 19"

Power supply: 230 Vac and 24 Vdc.

Color: Black.

Dimensions: H88 x W483 x D330 mm (2 RU).

Weight: 6.3 kg.

Main unit complete with monitoring and displaying system MET8CV4 for voice evacuation.
The system is designed for connecting 4 single 100 V speaker lines.
Optional interface MET4SC available for doubling the lines.
System setup and managing by COMETA Tutondo software.
Free download control App for sound diffusion also available.

• EN54-16 certified
• Built-in microphone and pre recorded messages that can be activated from the front panel or remotely
• Possibility of sending messages/calls simultaneously on multiple zones
• 4 monitored analog inputs
• 8 monitored trigger inputs for activating events (alarm, evacuation, etc) from the fire alarm central unit or other devices
• Main unit complete with 540 W power supply
• USB connector for firmware upgrades and configurations
• SD card reader to store EVAC messages and messages linked to events
• Proprietary bus for paging stations
• RS232 serial port and Ethernet port
• Supports Modbus over TCP/IP
• Metal case designed for standard rack mounting 19 "

Power supply: 230 Vac and 24 Vdc.

Color: Black.

Dimensions: H 88 x W 483 x D 330 mm (2 RU).

Weight: 6.3 kg.

Digitally controlled remote control unit CZ83.
Allows selection of video-audio sources and regulation of ambient audio parameters.

Main functions:

• Zone on/off
• Source selection
• Volume, bass, treble and balance control
• Timer for sleep function (for swithing off automatically after a preset time interval)
• 7 segments display showing selected source and function control
• Automatic power-up device for alarm paging
• Sleep timer for automatic power-down after a preset time 

Built-in IR receiver for the total control of all the zone parameters and A/V sources functions (sources equipped with STIF devices) through IR remote control.

Several control units can be installed in the same zone.

Power supply: 24 Vdc

Dimensions: 35 x 35 x 50 mm

NOTES: the module is compatible with electrical mounting boxes and cover plates, it can be installed on rectangular or round or square boxes, using one of the specific command adapters.

In-wall microphone module MC1NTC, for broadcast of voice messages specifically to a given room or general announcements to all zones.

• Digitally controlled microphone module, selector with two-digit display with selection of up to 99 zones
• "UP" and "DOWN" keys for choosing the zone to page
• "CALL" keys for activation of the microphone
• Pre-adjustment of the microphone's sensitivity accessible from the front panel

Power supply: 24 Vdc

Dimensions: 35x35x50 mm

NOTES: the module is compatible with electrical mounting boxes and cover plates, it can be installed on rectangular or round or square boxes, using one of the specific command adapters.